Description
Our Stealth Bomber kickstand is the genuine OEM stand for the Stealth Bomber electric bike, made from plastic alloy as a direct replacement for a worn, bent or broken stand. It is priced at $55 and ships at a flat rate per parts order, so you can get your bike parking upright and steady again without guesswork.
A tired stand is easy to ignore until the day the bike tips over in the garage or at the trailhead. With a machine that weighs about 165 lb, that fall can bend a lever, scratch the bodywork or worse. Replacing the stand now is a small job that protects everything else on the bike.
Stealth Bomber Kickstand at a Glance
- Genuine OEM kickstand for the Stealth Bomber
- Plastic alloy construction
- Direct replacement for a worn, bent or broken stand
- Condition: new, genuine OEM
- Price: $55
- Flat-rate parts shipping: $55 in the U.S., $100 worldwide
- 14-day returns on unused, uninstalled parts in original packaging
What the Kickstand Does
The kickstand holds the bike upright when you park it, then folds away so it stays clear of the ground while you ride. It does this job hundreds of times a season, in mud, dust, rain and heat. Every time you flick the Stealth Bomber kickstand down and lean the bike over, the stand and its pivot take the full weight of the bike.
When the stand is straight and the pivot is in good shape, the bike sits at a steady, predictable lean. When it is bent or worn, the bike can sit too upright and roll over, or lean too far and put extra stress on the stand and the frame mount.
Price and Why to Buy Now
The Stealth Bomber kickstand costs $55. Parts and accessories ship at one flat rate per order: $55 anywhere in the U.S. and $100 worldwide. If your bike needs other parts, such as brake hardware or a new seat, add them to the same order and pay shipping once.
A bent stand rarely straightens itself out, and it tends to get worse each time the bike leans on it. Ordering a replacement now costs far less than repairing the damage from a 165 lb bike falling onto its side.
Stealth Bomber Kickstand Specifications
| Detail | Information |
|---|---|
| Part | Kickstand, OEM replacement |
| Fits | Stealth Bomber |
| Material | Plastic alloy |
| Use | Direct replacement for a worn, bent or broken stand |
| Condition | New, genuine OEM |
| Price | $55 |
| Shipping | $55 U.S. or $100 worldwide, flat rate per order |
| Returns | 14 days from delivery, unused, uninstalled and in original packaging |
We only list facts we can confirm. For the stand length, weight, mounting bolt or spring details, check your owner’s manual or contact our team before ordering and we will help you check.
Signs Your Stealth Bomber Kick Stand Needs Replacing
- The bike sits more upright than it used to, or leans much further over
- The stand is visibly bent, twisted or cracked
- The foot is worn down or broken
- The stand wobbles or feels loose at the pivot
- It no longer folds all the way up, or drops while you ride
- The bike has tipped over while parked
If the stand drops or drags while you ride, stop using the bike until it is fixed. A stand that touches the ground in a turn can upset the bike suddenly.
Why a Damaged Stand Is a Safety Issue
It is easy to think of a stand as a parking accessory, but it affects safety in two ways. A weak stand can let the bike fall on you, a child or a car while it is parked. A stand that does not stay retracted can catch the ground while you are moving. Both are good reasons to treat a worn Stealth Bomber kick stand as a priority repair.
Who Should Buy This Part
This Stealth Bomber kickstand is for owners whose stand is bent, broken, cracked or worn at the pivot. It also suits riders who bought a used bike with a tired stand, and owners who want a spare on hand before a riding trip. If you ride hard off-road, a kickstand takes plenty of knocks from rocks and ruts, so keeping a replacement on the shelf makes sense.
Why Buy From Electric Dirt Bikes Direct
Electric Dirt Bikes Direct is a U.S. store based in Middletown, NY, selling electric dirt bikes, parts and accessories. We sell the Stealth Bomber itself, so we know the bike and the parts that wear out.
- New, genuine OEM replacement parts
- Live pricing shown on every product page
- One flat shipping rate per parts order, U.S. and worldwide
- Secure online checkout
- No restocking fee on returned parts and accessories
- Fitment help by email at sales@electricdirtbikesdirect.org
Compatibility and Fitment
The Stealth Bomber kickstand fits the Stealth Bomber. It is not listed for the Stealth Enduro or for other brands. If you have a custom frame, an aftermarket stand mount or a heavily modified bike, contact our team with a photo of the stand area before you order.
Not sure which model you have? Compare your bike with the Stealth models in our more brands range or check your owner’s manual. A quick fitment check before you order saves you the time and cost of a return.
OEM vs Aftermarket Stealth Bomber Kickstand
Universal kickstands are sold for many bikes. Here is how a genuine OEM stand compares with a typical aftermarket or universal option.
| Factor | Genuine OEM stand | Typical aftermarket stand |
|---|---|---|
| Fitment | Made for the Stealth Bomber mount | Often universal; may need adapters or cutting |
| Lean angle | Matches the factory setup | Can leave the bike too upright or too leaned over |
| Material | Plastic alloy | Varies by maker |
| Installation | Direct replacement | May need modification |
| Returns | 14-day returns from our store if unused | Depends on the seller |
Lean angle is the big one. A stand that is even slightly the wrong length changes how the bike sits, so the factory part is the safest way to get it right.
What Comes in the Box
You receive the Stealth Bomber kickstand as listed: a new, genuine OEM stand. Many stands use a return spring and a pivot bolt, and the listing does not state whether either is included. Check the condition of your existing spring and bolt before you order, and contact our team if either is damaged or missing.
Before You Order
Run through these quick checks before buying a Stealth Bomber kick stand.
- Confirm your bike is a Stealth Bomber
- Check the frame mount for cracks or bending; a damaged mount needs repair first
- Inspect your return spring and pivot bolt
- Plan how you will support the bike while the stand is off
- Add any other parts you need to share the flat shipping rate
Check the Frame Mount First
A new stand can only sit as well as the mount it bolts to. If the old stand bent in a fall, look closely at the frame mount for cracks, bending or stretched threads. A damaged mount makes even a new Stealth Bomber kick stand sit at the wrong angle. Do not try to bend or weld a frame mount yourself; have a qualified mechanic look at it.
Tools You Will Need
- A sturdy work stand or paddock stand, or a helper to hold the bike
- Sockets or wrenches that fit your stand’s pivot bolt
- A torque wrench
- Pliers or a spring tool if your stand uses a return spring
- Grease suitable for pivots, if your owner’s manual recommends it
- Thread locker, only where the manual calls for it
Support the Bike Before You Start
You are removing the very part that holds the bike up, so plan ahead. Put the Stealth Bomber on a sturdy work stand or have a helper hold it upright the whole time. At about 165 lb, it is too heavy to balance with one hand while you work a wrench with the other.
Safety First
Switch the bike off and remove the key before you start, so the motor cannot engage if the throttle is bumped. If any wiring runs near the stand mount, disconnect or remove the battery as your owner’s manual describes. Wear gloves when handling a return spring, as springs can snap back with real force.
How to Replace a Stealth Bomber Kickstand
- Park on level ground, switch the bike off and remove the key.
- Support the bike on a work stand or with a helper so it cannot fall.
- Photograph the old stand, spring and pivot so you can match the layout later.
- If your stand has a return spring, carefully unhook it with pliers or a spring tool.
- Remove the pivot bolt and take off the old stand. Keep the hardware together.
- Clean the frame mount and pivot area, and check for cracks, wear or damaged threads.
- Apply grease to the pivot if your owner’s manual calls for it.
- Fit the new stand, start the pivot bolt by hand and tighten to the torque in your owner’s manual with a torque wrench.
- Refit the return spring and check that the stand snaps fully up and fully down.
- Lower the bike onto the stand slowly with a hand on the bars, and check that it sits steady.
Test-Fit and Check the Lean Angle
Before final tightening, fit the Stealth Bomber kick stand and lower the bike gently onto it while your helper keeps a hand on it. The bike should sit at a stable lean, not close to upright and not leaning far over. If something looks wrong, stop and contact our team. Keep the packaging, because an installed or used part cannot be returned unless it arrived damaged, faulty or wrong.
Low-Speed Test Ride
Once the Stealth Bomber kickstand is fitted, take a short ride at low speed in a safe, open place. Make sure the stand stays fully up over bumps and in both directions of turning. Stop, flick it down and check that the bike parks steadily. Only then go back to normal riding.
When to Use a Mechanic
A Stealth Bomber kick stand swap is a simple job for most home mechanics, but the stand is a safety part. If you are not confident with the spring, the torque or the frame mount, have a qualified mechanic fit it for you. The same goes if the mount on the frame looks bent or cracked.
Stealth Bomber Kickstand Care and Maintenance
Rinse mud and grit off the stand and pivot after dirty rides, then let them dry. Grit in the pivot wears it out and makes the stand stiff. If your owner’s manual calls for grease on the pivot, apply a little at regular intervals and wipe off any excess so it does not collect dirt.
Every few rides, check that the pivot bolt is still tight and that the spring pulls the stand fully up. These quick checks keep your Stealth Bomber kickstand working smoothly for longer.
Parking on Soft Ground
Sand, mud, wet grass and hot asphalt can let the foot of any stand sink in until the bike falls over. On soft ground, slip a flat, firm object under the foot, such as a small plate or a piece of wood. Many riders carry a lightweight kickstand pad for this reason. It spreads the load and keeps your Stealth Bomber kick stand from digging in.
Parking on Slopes and Uneven Ground
Choose flat, firm ground whenever you can. On a slope, park so the bike leans into the stand rather than away from it, and avoid parking across steep ground. Leaving the bike where it can roll forward can fold a Stealth Bomber kick stand under the bike, so pick your spot with care.
Kickstand vs Work Stand
The side stand is for everyday parking. For maintenance, washing and chain or brake work, a paddock stand or work stand is the better tool, because it holds the bike upright and takes the load off the side stand. Using the right stand for the job is one of the easiest ways to make a Stealth Bomber kick stand last.
Off-Season Storage
If the bike will sit for weeks or months, store it on a work stand where you can, and keep it somewhere dry. Before the first ride of the new season, check the Stealth Bomber kickstand for corrosion on the pivot bolt, a weak spring or a loose mount, and fix anything you find before you ride.
Habits That Shorten Kickstand Life
- Sitting on the bike or letting others climb on it while it rests on the stand
- Kicking the stand down hard instead of lowering it
- Pushing the bike forward while the stand is down
- Parking on soft ground without a pad
- Ignoring a weak return spring
A Stealth Bomber kickstand is designed to hold the parked bike, not a rider. Avoiding these habits keeps the stand straight and the pivot tight.
Related Stealth Bomber Parts
When the bike is on the work stand, it is a good time to check other parts too. Browse the full parts and accessories range, or look at these related items:
- Stealth Bomber brake assembly hardware to refresh the bolts on your brakes
- Stealth Bomber motorcycle seat for a more comfortable ride
- Fenders for splash and rock-chip protection
- Replacement turtle or knobby tires
How Ordering Works
- Add to cart: add the kickstand, plus any other parts you need, to your cart.
- Secure checkout: enter your shipping address and complete payment through our secure checkout.
- Email confirmation and dispatch: we email your order confirmation, then our team prepares and dispatches your parts.
- Fit and ride: fit your Stealth Bomber kickstand using the steps above, test it at low speed and get riding.
Shipping Costs
Every parts order ships at a single flat rate: $55 within the U.S. and $100 worldwide. It does not change with the number of parts in the order, so a Stealth Bomber kick stand and a set of brake hardware ship for the same price as the stand alone. Ask our team if you need a delivery estimate for your location.
Returns and Damaged Items
You have 14 days from delivery to return the Stealth Bomber kickstand if it is unused, uninstalled and in its original packaging, and there is no restocking fee on parts and accessories. Installed or used parts cannot be returned unless they arrived damaged, faulty or wrong. If that happens, let us know within 48 hours of delivery. See our refund and returns policy for full details.
Rider Resources
Keeping your bike in good order is part of riding responsibly. For riding tips, trail access news and rider advocacy, the American Motorcyclist Association is a useful resource for anyone who rides off-road, on electric bikes or gas.
Stealth Bomber Kickstand FAQ
Will this Stealth Bomber kickstand fit my bike?
It is a genuine OEM direct replacement for the Stealth Bomber. If your bike has a custom frame or an aftermarket stand mount, send our team a photo before ordering.
Are the spring and pivot bolt included?
The listing does not state that a spring or bolt is included. Check your existing hardware and contact our team if anything is worn or missing.
What is the stand made of?
It is made from plastic alloy and built as a direct replacement for the original stand.
Can I fit a Stealth Bomber kick stand myself?
Most owners with basic tools can. Support the bike securely, follow the steps above and tighten to the torque in your owner’s manual. If you are unsure, use a qualified mechanic.
How much does shipping cost?
Parts ship at a flat rate per order: $55 in the U.S. and $100 worldwide.
What if it arrives damaged?
Tell us within 48 hours of delivery. Under our returns policy, a part that arrived damaged, faulty or wrong can be returned even if it has been installed.
Order Your Stealth Bomber Kickstand Today
Keep your bike parked safely with a genuine OEM Stealth Bomber kickstand for $55. Add it to your cart, pay through our secure checkout and we will ship it at a flat rate across the U.S. and worldwide. Need help with fitment first? Contact our team or email sales@electricdirtbikesdirect.org.
