Sur Ron Rear Fender – OEM Light Bee X Replacement

Description

The Sur Ron rear fender on this page is a genuine OEM replacement made for the Sur-Ron Light Bee X, molded in durable high-strength plastic with a black finish that matches the stock bodywork. It sells for $60, ships at a flat rate per order, and lets you fix a cracked, sagging or missing fender before your next ride.

If your old fender split on a hard landing, snapped in a tip-over or simply looks tired after a few seasons, a new Sur Ron rear fender restores the clean lines of your bike and keeps roost and spray where it belongs. Order today and you can have the tail of your Light Bee X looking factory fresh again.

Sur Ron Rear Fender at a Glance

• Genuine OEM replacement rear fender for the Sur-Ron Light Bee X
• Durable high-strength plastic
• Black finish to match the factory bodywork
• Condition: new, genuine OEM
• Price: $60
• Flat-rate parts shipping: $55 within the U.S., $100 worldwide
• 14-day returns on unused, uninstalled parts in original packaging

What a Rear Fender Does on the Light Bee X

The rear fender sits over the back wheel and catches the mud, water, sand and small stones the tire throws up and back. Without it, that spray lands on your back, your seat and the rear of the frame. On a bike that can reach up to 47 mph in Sport mode, the rear wheel flings debris hard, so a solid fender matters on every wet or loose trail.

A Surron rear fender also finishes the shape of the bike. The Light Bee X is known for its slim, light profile, and the fender completes the tail section. A cracked or missing one makes a well-kept bike look neglected and leaves more of the rear end exposed to grime after every ride.

Price and Why to Buy Now

The Sur Ron rear fender is priced at $60. Shipping is a flat rate per order, not per item: $55 anywhere in the U.S. and $100 worldwide. That makes it smart to add any other parts you need, such as grips or a shock mud guard, to the same order.

Buying now means you fix the problem before it gets worse. A small crack in a plastic fender tends to grow with vibration and every impact, and a loose fender can rattle or rub on the tire. Replacing it early keeps your Light Bee X tidy, quiet and ready for the trail.

Sur Ron Rear Fender Specifications

We list only the details we can confirm. If you need exact dimensions or the weight of the part, check your owner’s manual or contact our team before you order and we will help.

Why Buy From Electric Dirt Bikes Direct

We are a U.S. store based in Middletown, NY, focused on electric dirt bikes, parts and accessories. We also sell the Sur-Ron Light Bee X itself, so our team knows the bike and the parts riders replace most often.

• Genuine OEM replacement parts, sold new
• Clear pricing with the live price shown on the page
• One flat shipping rate per parts order across the U.S. and worldwide
• Secure online checkout
• 14-day returns with no restocking fee on parts and accessories
• A real team you can reach by email at sales@electricdirtbikesdirect.org

Signs You Need a New Surron Rear Fender

• Cracks, splits or white stress marks in the plastic
• A broken or torn mounting point
• The fender sags, rattles or touches the tire when the suspension compresses
• Pieces missing after a crash or tip-over
• Heavy scuffs or fading you want to clean up before selling the bike
• The fender was removed earlier and you want the bike back to stock

Any of these is a good reason to order. A fender that touches the tire is the most urgent, because rubbing can wear through the tire and the plastic at the same time, and a loose part can fall off at speed.

Who Should Buy This Part

This Sur Ron rear fender is for Light Bee X owners who want a factory-correct replacement rather than a universal part. It suits trail riders who crash now and then, owners restoring a used bike, and anyone who likes to keep a spare on the shelf for race weekends or long riding trips away from home.

It is also a good buy if you are preparing a bike for sale. Buyers notice tired or broken bodywork first, and a clean Surron rear fender is one of the cheapest ways to make a used Light Bee X look cared for.

Compatibility and Fitment

This Sur Ron rear fender fits the Sur-Ron Light Bee X. It is not listed for other Sur-Ron models, and it is not a universal fender for other brands. If your bike has aftermarket bodywork, a modified subframe or a different tail section, check your setup with our team before ordering so you get the right part the first time.

Not sure which model you own? Check the model information in your owner’s manual, look up the lineup on Sur-Ron USA, or send our team a photo of the rear of the bike. Checking fitment before you order is the easiest way to avoid a return.

OEM vs Aftermarket Surron Rear Fender

Aftermarket fenders exist, and some riders like them for a custom look. Here is how a genuine OEM Surron rear fender compares with a typical universal or aftermarket option.

For most owners the OEM part is the simple choice. It goes on where the old one came off, it looks like it came on the bike, and you skip the guesswork that often comes with universal parts.

What to Expect in the Box

You receive the Sur Ron rear fender as listed: a new, genuine OEM black plastic fender. The listing does not state that mounting hardware is included, so plan to reuse your original fasteners if they are in good condition. If bolts are missing or damaged, contact our team before ordering so we can help you work out what you need.

Before You Order

A Surron rear fender is a simple part, but a quick check before you buy saves time later.

• Confirm your bike is a Sur-Ron Light Bee X
• Check the condition of your original fasteners
• Look at the subframe and mounting points; a bent or cracked mount should be fixed first
• Note any light, reflector or bracket fitted to the old fender
• Add other parts you need to the same order to make the most of flat-rate shipping

Tools You Will Need

• Hex keys or sockets that fit your bike’s fasteners
• A torque wrench
• Thread locker, only where your owner’s manual calls for it
• A work stand or paddock stand to hold the bike upright
• A small tray for bolts and a phone to take photos
• Clean rags, mild soap and water

Safety Before You Start

Switch the bike off and remove the key before you touch anything. A fender swap does not normally involve the battery, but if any wiring runs near the fender or you need to work close to electrical parts, remove the battery as your owner’s manual describes. Work on level ground with the bike secure on a stand.

How to Fit a Sur Ron Rear Fender, Step by Step

1. Park the bike on level ground, switch it off, remove the key and set it on a stand.
2. Take a few photos of the old fender from both sides so you can see how it sits and where each fastener goes.
3. If a light, reflector or bracket is attached to the old fender, disconnect or unbolt it and note how any wiring is routed.
4. Remove the seat or any panels that cover the fender mounts, if your bike requires it. Your owner’s manual shows the order.
5. Remove the fasteners holding the old fender and lift it off. Keep the bolts together in a tray.
6. Clean the mounting points and inspect the subframe and threads for damage.
7. Offer up the new Surron rear fender and start every fastener by hand so nothing cross-threads.
8. Check the alignment, then tighten to the torque in your owner’s manual with a torque wrench. Use thread locker only where the manual calls for it.
9. Refit any accessories, wiring, panels and the seat.
10. Push down on the rear of the bike and spin the wheel to make sure the tire clears the fender.

Test-Fit Before Final Install

Plastic parts are easy to mark during fitting, so test-fit carefully. Hold the Sur Ron rear fender in place with the fasteners loose, check that every hole lines up, and look at the gap to the tire. Only tighten once you are happy. Remember that a fender that has been installed or ridden cannot be returned unless it arrived damaged, faulty or wrong.

Do Not Overtighten Plastic

The Sur Ron rear fender is tough plastic, but like any plastic part it can crack if fasteners are overtightened. Use a torque wrench, bring each fastener up gradually and evenly, and stop at the value in your owner’s manual. If your bike uses washers at the fender mounts, refit them, because they spread the clamping load across the plastic and protect the holes.

First Ride Checks

After fitting, take a short, slow ride on a quiet, safe surface. Listen for rattles or rubbing and look for any movement in the Surron rear fender. Check the fasteners again after the first ride or two, as plastic parts can settle slightly. Once everything stays tight, you are ready to get back to normal riding.

Sur Ron Rear Fender Care and Maintenance

Your new fender needs very little care. Wash it with mild soap, water and a soft brush after muddy rides, then rinse well. Avoid harsh solvents and strong degreasers on the plastic, which can stain or weaken it over time. Keep pressure washers at a distance and never aim them at electrical parts or bearings.

At each wash, check the fasteners for tightness and look for early cracks around the mounting holes. Catching a small issue early costs far less than replacing a Sur Ron rear fender after it breaks on the trail.

Protecting the Fender on Rough Trails

Most damage to a Sur Ron rear fender comes from crashes, drops and tip-overs. Lay the bike down carefully when you stop on a slope, and use a stand rather than leaning the tail against trees or fences. When loading the bike into a truck bed or onto a trailer, make sure tie-down straps do not press against the fender.

Storage and Transport Tips

Store the bike out of direct sun when you can, as long UV exposure fades black plastic. If you carry the bike on a hitch rack, check that the rack arms do not rest against the Surron rear fender. If you buy a spare to keep on the shelf, leave it in its original packaging so it stays clean and protected.

Where a Good Rear Fender Matters Most

Wet spring trails, creek crossings, sandy washes and muddy tracks are where a good rear fender earns its keep. In these conditions the rear tire picks up a lot of material, and without proper coverage it ends up on your gear and the back of the bike. A working Sur Ron rear fender keeps you cleaner and cuts time at the wash stand.

Pair It With the Rear Shock Mud Guard

The rear fender protects you and the tail of the bike from above. The Sur Ron rear shock mud guard protects the rear shock, blocking mud, water and stones before they hit the shock body, spring and linkage. Many owners replace both at once, and with flat-rate shipping per order, ordering them together makes sense.

Planning a Street Build?

Some owners set up their Light Bee X for road use with our Surron street conversion kit. A complete, undamaged fender is part of keeping the tail section in good order on any build. Road rules vary by state, so check your local regulations before riding on public roads.

Related Light Bee X Parts

While the bike is on the stand, it is worth checking a few other wear parts. Browse our full parts and accessories range for genuine replacements. Parts owners often order alongside a Sur Ron rear fender include:

• Sur-Ron handlebar grips for fresh control after a season of riding
• The rear shock mud guard to protect the shock
• A replacement handlebar if a crash has bent yours
• A spare charger for a second charging spot at home or at the trailhead

How Ordering Works

1. Add to cart: click Add to cart on this page, plus any other parts you need.
2. Secure checkout: enter your shipping details and pay through our secure checkout.
3. Email confirmation and dispatch: you get an order confirmation by email, and our team packs and dispatches your parts.
4. Fit and ride: fit your new Sur Ron rear fender using the steps above and get back on the trail.

Shipping Costs and Delivery

Parts and accessories ship at a flat rate per order: $55 within the U.S. and $100 for worldwide delivery. The rate covers the whole parts order, so adding a second or third item to your Surron rear fender order does not raise the shipping cost. Delivery time depends on your location, so contact our team if you need an estimate for your address.

Returns and Damaged Items

You can return the Sur Ron rear fender within 14 days of delivery if it is unused, uninstalled and in its original packaging. There is no restocking fee on parts and accessories. Installed or used parts cannot be returned unless they arrived damaged, faulty or wrong. If that happens, tell us within 48 hours of delivery. Full details are on our refund and returns policy page.

Ride Responsibly

A fresh fender is a good moment to think about trail care too. Stay on open, legal trails, cross streams only at designated points, and pack out everything you bring in. Tread Lightly! offers practical advice on low-impact off-road riding that applies well to electric dirt bikes.

Sur Ron Rear Fender FAQ

Does this Sur Ron rear fender fit my Light Bee X?

Yes. It is a genuine OEM replacement made for the Sur-Ron Light Bee X. If your bike has a modified tail section or aftermarket bodywork, contact our team before ordering so we can check it with you.

Is mounting hardware included?

Hardware is not listed as included. Most owners reuse their original fasteners. If yours are damaged or missing, ask our team before you order.

What is the Surron rear fender made of?

It is made of durable high-strength plastic in black, so it matches the stock look of the bike.

How much does shipping cost?

A Sur Ron rear fender ships at the flat parts rate per order: $55 within the U.S. and $100 worldwide.

Can I return it if I change my mind?

Yes, within 14 days of delivery, as long as it is unused, uninstalled and in its original packaging. There is no restocking fee on parts.

Do I need a mechanic to fit it?

Most owners with basic hand tools can fit it at home. If you are unsure about any step, have a qualified mechanic do the job for you.

Order Your Sur Ron Rear Fender Today

Get your Light Bee X back to factory condition with a genuine OEM Surron rear fender for $60. Add it to your cart, check out securely, and we will ship it at a flat rate across the U.S. and worldwide. Questions about fitment? Contact our team or email sales@electricdirtbikesdirect.org before you order.